Gas and safety · Published 2026-11-15 · Updated 2026-11-15
Do you need a Gas Safe engineer?
In the UK, gas work must be done by an engineer on the Gas Safe Register. This guide explains what counts as gas work and how to check someone.
Quick answer. Any work on a boiler, gas fire, gas hob or gas pipe must be done by an engineer on the Gas Safe Register. Ask to see their ID card and check the licence number on the register before they start.
What counts as gas work
- Installing, repairing or servicing a gas boiler.
- Gas fires, gas hobs and gas cookers.
- Gas pipework in the home.
What isn't gas work
- Most general plumbing, such as taps, toilets, sinks and waste pipes, isn't gas work.
- If a job touches a gas appliance or gas pipe, treat it as gas work.
How to check an engineer
- Ask to see their Gas Safe ID card, with a photo and a licence number.
- Check the number on the Gas Safe Register website.
- Look at the back of the card. It shows what types of gas work they're registered for.
- On Coventry Home Fix, gas services only show after we've checked the Gas Safe number ourselves.
Landlords
- If you rent out a home, you must have the gas appliances checked every year by a Gas Safe registered engineer and give your tenant a copy of the record.
If you smell gas
- Open doors and windows, turn off the gas at the meter if you can, and don't use switches or flames.
- Call the National Gas Emergency Service on 0800 111 999.
At a glance
| Job | Gas Safe engineer needed? | Notes |
|---|---|---|
| Boiler repair, service or installation | Yes | Gas work. |
| Gas hob, cooker or gas fire | Yes | Gas work. |
| Gas pipework | Yes | Gas work. |
| Replacing a tap or toilet | No | General plumbing. |
| Unblocking a sink or drain | No | General plumbing. |
| Replacing a radiator valve | Usually no | Plumbing, but check if the boiler is involved. |
| Bleeding a radiator | No | Homeowners often do this themselves. |
This is general guidance, not legal advice. Rules and prices change, so check the official sources listed below.
Questions
How do I check a Gas Safe engineer?
Ask to see their Gas Safe ID card, then check the licence number on the Gas Safe Register website. The back of the card shows what types of gas work they're registered for.
How much does a boiler service cost in Coventry?
One published guide puts an annual boiler service and safety check at about £100 to £150. Prices vary, so ask for a written quote.
What should landlords do?
Landlords must have gas appliances checked every year by a Gas Safe registered engineer and give tenants a copy of the record.
What if I think someone did gas work without being registered?
Don't use the appliance, and get a Gas Safe engineer to check it. You can report concerns to the Gas Safe Register.
Sources
Keep reading
- Find a plumber in Coventry
- How to hire a handyman
- Boiler pressure too low: what to do and how to top it up
- Boiler not working? What to check before calling an engineer
- Why is my radiator cold at the bottom? Causes and fixes
- What does a plumber charge for a leaking tap in the UK?
- How to stop a dripping tap: washer, O-ring or cartridge
- Find a handyman in Coventry
- How Coventry Home Fix works